Amana NGD5800DW Installationshandbuch PDF herunterladen (Seite 19)

1. Remove door from dryer

IMPORTANT: If the protective lm has not yet been removed

from the dryer, peel the lm from the dryer door before

proceeding.

Using a TORX

T25

screwdriver, remove the 4 screws

securing the door hinge to the dryer and lift up and out to

remove the door. Place the door on a soft towel or other

non-scratch surface. Reinstall the 4 screws in the holes.

Reverse door swing round-shaped door – double handle

2. Move the door strike

Using a TORX

T25

screwdriver, remove the 2 screws

securing the door strike to the door frame of the dryer. Rotate

the strike 180° and attach to the opposite side of dryer door

frame, as shown.

Remove inner door from outer door

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.

4. Remove hinge and latch

Using a TORX

T25

screwdriver, remove the 3 TORX

screws

securing the latch plate and latch backing plate and the 5

screws holding the hinge assembly in place.

Hinge

Latch

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Keine Kommentare

Amana NGD5800DW Installationshandbuch Seite 19