Amana PGD**C Bedienerhandbuch PDF herunterladen (Seite 8)

Condensing & Non-Condensing Furnaces

1. Reinstall gas manifold and valve.

2. Reconnect wiring (and burner box hose on GUD and

GCD furnaces) to gas valve. Secure wiring to mani-

fold using wire ties provided. Ensure wiring does not

interfere with orifices or burners.

Package Gas-Electric

PACKAGE GAS-ELECTRIC UNITS EQUIPPED WITH PI-

LOT

1. Reinstall gas manifold and valve.

2. Secure the pilot assembly to the burner tray.

3. Reconnect wiring to gas valve. Secure wiring to

manifold using wire ties provided. Ensure wiring

does not interfere with orifices or burners.

PACKAGE GAS-ELECTRIC UNITS WITHOUT PILOT

1. Reinstall gas manifold and valve.

2. Reconnect wiring to gas valve. Secure wiring to

manifold using wire ties provided. Ensure wiring

does not interfere with orifices or burners.

Manifold Reinstallation

CAUTION

Pilot assembly must be properly aligned

with burners for proper ignition. Refer to

Figure 11.

"A"

CORRECT

POSITION

DIMENSION

"A" CANNOT

EXCEED 1/4"

Figure 11

Pilot Assembly Positioning

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Amana PGD**C Bedienerhandbuch Seite 8