Amana PACKAGE TERMINAL Spezifikationen Seite 6

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 12
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 5
C/D - 6
42"
(1066.8mm)
13-3/4"
(349.3mm)
16-1/16"
(408 mm)
ACCESSORIES
Wall Sleeve (42” wide x 16-1/16 high x 13-3/4” deep)
Standard insulated wall sleeve fits all Amana Pack-
aged Terminal Units. Shipped separately to allow in-
stallation during construction.
Outdoor Grilles
Available in stamped aluminum and an attractive ex-
truded aluminum architectural grille for application with
WS900B wall sleeve. The architectural grille is avail-
able in anodized natural, 3 stock colors and custom
colors to blend with the building exterior. CB=Clear,
DB=Dark Bronze, ZB=Driftwood, WB=White,
SB=Special (Custom) Color
Hard Wire Kit (not shown)
Used to permanently wire to chassis when standard
subbase and power cord are not utilized.
Power Disconnect Switch (not shown)
The PSHW**A power disconnect switch can be used
for 265 or 230/208 volt physical disconnect where re-
quired by local codes. The switch is rated at 30 amp
capacity. The switch is for use with Amana's standard
subbases or PTPWHWK4 Hard Wire Kit.
Subbase Kit
The fully skirted subbase conceals wiring while pro-
viding strong support, if needed. Plug-in receptacle
and field wiring access speeds installation. Electrical
accessories such as fuse holders, circuit breakers and
disconnect switches meet N.E.C. requirements.
Fuse Holder Kit (not shown)
Cartridge style fuses can be installed in fuse holder for
use in subbase or chassis. Available in 15, 20 and 30
amp. (Included on 265v unit).
Circuit Breaker Kit (230/208v only)
The circuit breaker kit, available in 15, 20 or 30 amp,
can be used with Amana's subbases. It gives over-
current protection and its location allows turning unit
on or off without tools.
External Transformer Kit (not shown)
40VA transformer to provide additional low voltage
power to accomodate a wide range of energy man-
agement systems or external relays. EXTRK01A and
EXTRK02A are the only approved transformer kits
that can be used.
Remote Temperature Sensor
Allows inexpensive, low voltage temperature sensing
on internal wall for more accurate temperature control.
Thermostats
The following thermostats offer remote control. Any
thermostat other than those listed must be submitted to
Amana for approval prior to use.
Wire Harness Kit (not shown)
For quick connections of remote thermostat or front desk
with jumpers and connectors.
STC 30 Rating Accessory Kit (not shown)
Raises sound ratings from 27 to 30 to meet or exceed
most sound test requirements.
FHK315C 230/208V 15A
FHK320C 230/208V 20A
FHK330C 230/208V 30A
PSHW03A 230/208V
PSHW04A 265V
WS900B Wall Sleeve
PTPWHWK4 Hard Wire Kit
Skirting
Skirting
Leveling Legs
Optional
Fuse Holder
Location
Optional
Power Switch and Circuit Breaker
Location
Power Receptacle
Subbase Box Assembly
CBK3**C Circuit Breaker Kit
Standard Outdoor Grille
SGK01B Single Pack
SGK10B Ten Pack
Architectural Grille
AGK01*B Single Pack
SGK
AGK
STC101A
STC 30 Rating
Accessory Kit
RTS02
Remote
Temperature Sensor
Note: Thermostats listed are manual changeover
with the exception of 20189101
NOTE: DO NOT CONNECT THE X1 TERMINAL.
PWHK01B Wire Harness Kit
AMANA C/D MODELS
AMANA C/D MODELS
EXTRK03A 208/230V
EXTRK04A 265V
PTSB320C 230/208V 15/20A
PTSB330C 230/208V 30A
PTSB420C 265V 15/20A
PTSB430C 265V 25A
PTSB000C Non-Electrical
Model
Heat
Stages
Cool
Stages
Programmable Shape
1213408 1 1 Yes Rectangle
C5200609 1
1 No Round
D9945801 2
1 No Rectangle
20189101 2
1
No
(Auto Changeover)
Rectangle
1213410 2
1 Yes Rectangle
Seitenansicht 5
1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare