Amana PGD**C Bedienerhandbuch PDF herunterladen (Seite 1)

EFFECTIVE: June 1996

10308707

As a professional installer you have an obligation to

know the product better than the customer. This

includes all safety precautions and related items.

Prior to actual installation, thoroughly familiarize your-

self with this Instruction Manual. Pay special atten-

tion to all safety warnings. Often during installation or

repair it is possible to place yourself in a position

which is more hazardous than when the unit is in

operation.

ATTENTION INSTALLING PERSONNEL:

Remember, it is your responsibility to install the

product safely and to know it well enough to be able

to instruct a customer in its safe use.

Safety is a matter of common sense...a matter of

thinking before acting. Most dealers have a list of

specific good safety practices...follow them.

The precautions listed in this Installation Manual

should not supersede existing practices but should

be considered as supplemental information.

RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.

Description

This kit is for the purpose of converting Amana Air Command 80 SSE, SV, 90 and 95 furnaces (GUIA, GUIB, GUIC,

GCIA, GCIB, GCIC, GCC, GUC, GUD, GUX, GUIS, GCIS, GDC, and GCD) and Packaged Gas/Electric Units

(PGB**C and PGD**C) from natural to propane gas. Any conversion to propane gas is the responsibility of, and at

the risk of, the person making the conversion.

WARNING

PERSONAL INJURY HAZARD

This conversion kit shall be installed

by a qualified agency in accordance

with the manufacturers instructions

and all applicable codes and require-

ments of the authority having jurisdic-

tion. If the information in these in-

structions is not followed exactly, a

fire, explosion or production of car-

bon monoxide may result causing

property damage, personal injury or

loss of life. The qualified service

agency performing this work assumes

responsibility for the proper conver-

sion of this appliance with this kit.

LPTK07A Propane Gas

Conversion Kit

Installation Instructions

AVERTISSEMENT

Cet ensemble de la conversion sera

installé par une agence qualifiée dans

accord avec les directives des fabricant

et tous codes applicables et exigences

de l'autorité ont la juridiction. Si les

informations dans ces directives ne sont

pas suivies exactement, un feu, explo-

sion ou production de [monoxide] du

carbone peut résulter cause propriété

endommage, blessure personnelle ou

perte de vie. La représentation de

l'agence du service qualifiée ce travail

suppose la responsabilité pour la con-

version adéquate de cet appareil avec

cet ensemble.

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Installation Instructions

1EFFECTIVE: June 199610308707As a professional installer you have an obligation toknow the product better than the customer. Thisincludes all safety

Seite 2 - Installation

2WARNINGPERSONAL INJURY HAZARDTo prevent death, personal injury orproperty damage due to fire or explo-sion caused by a propane gas leak,

Seite 3

3Figure 4Removal of Metal Screen Insertsa) Remove entire burner box assembly, includingburners, from the partition panel as one unit.b) Hold asse

Seite 4 - Single Stage Units

49. Check inlet gas pressure. With the power and gasoff, connect a water manometer or adequate gaugeto the inlet pressure tap of the gas valve. With

Seite 5

5OFFONMPC132WRINLETOUTLETPressure RegulatorAdjustment (Under Cap)Inlet Pressure Tap (Side of Valve)Outlet Pressure Tap (Side of Valve)MainSolenoidRedu

Seite 6 - Pressure

6Setting GUD and GCD ManifoldPressureA tapped opening is provided in the gas manifold (Fig-ure 10) to facilitate measurement of the manifold pres-sure