Amana W10216186A Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Trockner Amana W10216186A herunter. Amana W10216186A User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken

Inhaltsverzeichnis

Seite 1 - ELECTRIC DRYERS

ELECTRONIC ELECTRIC DRYERSUse & Care GuideFor questions about features, operation/performance,parts, accessories or service, call: 1-800-688-9900

Seite 2 - DRYER SAFETY

102. Remove neutral ground wire from external ground conductor screw. Connect neutral ground wire and the neutral wire (white or center wire) of power

Seite 3 - WARNING:

113. Connect ground wire (green or bare) of direct wire cable to external ground conductor screw. Tighten screw.ABCDEFA. External ground conductor scr

Seite 4 - INSTALLATION INSTRUCTIONS

123-wire connection: Direct wireUse where local codes permit connecting cabinet-ground conductor to neutral wire.Direct wire cable must have 5 ft (1.5

Seite 5 - Dryer Dimensions

13Venting RequirementsWARNINGFire HazardUse a heavy metal vent.Do not use a plastic vent.Do not use a metal foil vent.Failure to follow these instruct

Seite 6 - Electrical Requirements

14 Do not use an exhaust hood with a magnetic latch.Improper venting can cause moisture and lint to collect indoors, which may result in:Moisture dam

Seite 7 - 3-wire receptacle (10-30R)

15 Periscope Installation (For use with dryer vent to wall vent mismatch):Part Number 4396037 - 0" (0 mm) to 18" (457.2 mm) mismatchPart Nu

Seite 8 - Electrical Connection

16Connect Vent1. Using a 4" (102 mm) clamp, connect vent to exhaust outlet in dryer. If connecting to existing vent, make sure the vent is clea

Seite 9

174. Move hinge to the other side and reattach with the 4 screws removed in Step 2. Make sure locator pins line up in holes and drive the top 2 screws

Seite 10 - (127 mm)

18DRYER USEStarting Your DryerWARNINGExplosion HazardKeep ammable materials and vapors, such as gasoline, away from dryer.Do not dry anything that ha

Seite 11

19How Automatic Cycles WorkThe AccelerCare function improves drying performance with Auto Moisture Sensing Plus, which advances the cycle as moisture

Seite 12 - Optional 3-wire connection

2TABLE OF CONTENTSDRYER SAFETY...2INSTALLATION INSTRUCTIONS ...

Seite 13 - Venting Requirements

20Status LightsYou may follow the progress of your dryer with the drying Status indicator lights.Timed CycleThe Timed Cycle light glows green during a

Seite 14 - Plan Vent System

21Timed CyclesUse Timed Cycles to select a specific amount of drying time and a drying temperature. (Temperatures are not selectable with Air Fluff.)

Seite 15 - Install Leveling Legs

22ModifiersUse Modifiers to select time, temperatures, and dryness levels for the Timed Cycles. Not all Modifiers are available with all options and c

Seite 16 - Reverse Door Swing

23To use the heated dryer rack:Do not remove the lint screen.1. Open dryer door. AA. Front edge2. Place dryer rack over the bottom of the dryer door

Seite 17 - Complete Installation

24IMPORTANT: Do not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and damage to both the dry

Seite 18 - DRYER USE

25TROUBLESHOOTING First try the solutions suggested here and possibly avoid the cost of a service call...Dryer OperationDryer will not run Has a fuse

Seite 19 - Drying and Cycle Tips

26 Is the exhaust vent or outside exhaust hood clogged with lint, restricting air movement? Run the dryer for 5-10 minutes. Hold your hand under th

Seite 20 - Status Lights

27ASSISTANCE OR SERVICEBefore calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you s

Seite 21

AMANA® LAUNDRY WARRANTYLIMITED WARRANTYFor one year from the date of purchase, when this major appliance is operated and maintained according to instr

Seite 22 - Drying Rack Options

IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of re, electric shock, or injury to persons when using the dryer, follow ba

Seite 23 - DRYER CARE

4INSTALLATION INSTRUCTIONSTools and PartsGather the required tools and parts before starting installation. Read and follow the instructions provided w

Seite 24 - Changing the Drum Light

5 A level floor with a maximum slope of 1" (25 mm) under entire dryer. (If slope is greater than 1" [25 mm], install Extended Dryer Feet Ki

Seite 25 - TROUBLESHOOTING

6Installation spacing for cabinet installation For cabinet installation, with a door, minimum ventilation openings in the top of the cabinet are requ

Seite 26 - Excessive Weight Hazard

7If using a power supply cord:Use a UL listed power supply cord kit marked for use with clothes dryers. The kit should contain: A UL listed 30-amp po

Seite 27 - ASSISTANCE OR SERVICE

8Electrical ConnectionPower Supply CordWARNINGFire HazardUse a new UL listed 30 amp power supply cord. Use a UL listed strain relief. Disconnect power

Seite 28 - LAUNDRY WARRANTY

9 Put power supply cord through the strain relief. Be sure that the wire insulation on the power supply cord is inside the strain relief. The strain

Kommentare zu diesen Handbüchern

Keine Kommentare