Amana AGR4230BAB Installationshandbuch PDF herunterladen (Seite 13)

2. Remove the cap from the gas pressure regulator using a

flat-blade screwdriver.

NOTE: Be sure sealing washer remains in the same position.

3. To convert to LP gas, unscrew the plastic adjustment screw

by hand, turn it over, and screw it in again.

4. Reinstall the cap.

To Convert Surface Burners

1. Remove burner grate, burner caps and burners.

2. Locate LP gas orifice spuds for top burners in the bag

containing literature included with the range. Four LP gas

spuds are stamped “88.”

3. Remove Natural gas orifice spuds using a 7 mm combination

wrench.

4. Install LP gas orifice spuds using a 7 mm combination

wrench.

NOTE: The range cooktop is equipped with 4 standard

burners.

5. Place the Natural gas orifice spuds in the parts bag for future

use and keep with the bag containing literature.

6. Reinstall burners, burner caps and burner grates.

To Convert Oven Burner

1. Open the oven door and remove oven racks and oven tray

with flame spreader and set aside.

2. Remove screw from the oven burner. Lift oven burner and pull

the burner toward you. The orifice spud is behind the oven

burner air shutter.

A. Cap

Inlet pressure

to Natural

gas

Inlet

pressure to

LP gas

A. Cap

B. Sealing washer

C. Adjustment

screw

A. Burner cap

B. Burner

180

A. Spud

B. Holder

A. Standard burner - LP gas orifice spud number 88

B. Standard burner - LP gas orifice spud number 88

C. Standard burner - LP gas orifice spud number 88

D. Standard burner - LP gas orifice spud number 88

A. Oven burner

B. Air shutter

C. Screw

1 2 ... 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Amana AGR4230BAB Installationshandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Amana AGR4230BAB